ISO 9001:2015 certified · Supplier & exporter of stainless steel pipe fittings, flanges & valves
SS 3D Bend 90° (Butt Weld)

Representative image — supplied to your specification & grade.

Butt Weld Fittings

SS 3D Bend 90° (Butt Weld)

Kotadia Inc. is a manufacturer, supplier & exporter of SS 3D Bend 90° (Butt Weld). Standard: 3D bend 90° Material: WP304 / WP316L Features: 3D radius gives a gentler turn than a standard elbow. Application: Hygienic transfer lines, CIP returns and pharma process pipe where low turbulence and gentle product handling matter.

Made in Ahmedabad, Gujarat, India · supplied across India · exported worldwide

Made to order

or call +91 8497001001 · reply usually within 1–2 working hours

  • ISO 9001:2015 certified
  • MTC (Material Test Certificate) on request
  • RoHS & REACH compliant
  • Batch-traceable production
  • Custom sizes & grades on order
  • Export-ready packing & documents

SS 3D Bend 90° (Butt Weld) is manufactured and supplied by Kotadia Inc. in Ahmedabad, Gujarat, India, in WP304 / WP316L to ASTM A403. 3D radius gives a gentler turn than a standard elbow. Typical use: Hygienic transfer lines, CIP returns and pharma process pipe where low turbulence and gentle product handling matter. Available in 1/2" to 4". Every lot is dimensionally checked before packing and comes with an MTC on request; custom sizes, threads and coatings are made to drawing. Also supplied across India and exported worldwide — request a quote with your size, grade and quantity.

Areas we serve

SS 3D Bend 90° (Butt Weld) is dispatched from Ahmedabad across India, including:

  • Ahmedabad
  • Surat
  • Vadodara
  • Faridabad
  • Delhi
  • Vapi
  • Dahej
  • Rajkot
  • Bengaluru
  • Bangalore
  • Chennai
  • Noida
  • Rohtak
  • Pune
  • Mumbai

We also export to:

  • UAE
  • USA
  • UK
Technical product sheetKotadia Inc.
Type3D bend 90°
StandardASTM A403
MaterialWP304 / WP316L
Size1/2" to 4"
Radius3 x OD
EndsButt weld, bevelled
CertificationMTC and 3.1 on request
Manufactured to IS / DIN / ISO / ASTM & BS standards — non-standard sizes made to drawing.Ask for full datasheet →

Product description

Overview

A 90 degree stainless bend with a centre-line radius of three pipe diameters instead of the usual one and a half. The wider sweep lowers pressure loss and turbulence, and it is the preferred bend on hygienic lines where product must not be thrown against a tight wall.

3D bend 90°.

Construction and features

  • 3D radius gives a gentler turn than a standard elbow.
  • Butt weld ends, bevelled and ready to fit.
  • ASTM A403 WP304 / WP316L, 1/2″ to 4″.
  • Also supplied in a polished, EP finish for pharma.

Size range

Size OD Radius Material
1/2" 21.3 mm 3D WP304 / WP316L
1" 33.4 mm 3D WP304 / WP316L
1.5" 48.3 mm 3D WP304 / WP316L
2" 60.3 mm 3D WP304 / WP316L
3" 88.9 mm 3D WP304 / WP316L
4" 114.3 mm 3D WP304 / WP316L

Applications

Hygienic transfer lines, CIP returns and pharma process pipe where low turbulence and gentle product handling matter.

Material, grade and certification

Supplied in WP304 / WP316L.

Every lot is checked dimensionally before packing, and a Material Test Certificate (MTC) is issued on request. Sizes outside the table above, intermediate lengths and special coatings are made to drawing; send the sketch or sample and we will quote against it.

Manufacturer-Direct · Pan-India & Export

Need a quote for SS 3D Bend 90° (Butt Weld)?

Share your sizes, grades and quantity — our team replies with the best manufacturer-direct price, usually within 1–2 working hours.

Frequently asked questions

What sizes of ss 3d bend 90° (butt weld) do you supply?
We supply ss 3d bend 90° (butt weld) in 1/2" to 4". Sizes outside the table on this page and special finishes are made to drawing, so send the requirement and quantity for a quotation.
Which material, grade or finish should I choose?
WP304 / WP316L. Grade and finish are matched to the service - 316L and a finer polish for pharma and chloride exposure, 304 for general dairy and utility lines. Mill test certificates are issued on request.
Can you make a custom ss 3d bend 90° (butt weld)?
Yes. Non-standard dimensions, ends and finishes are produced to drawing or sample. Send the sketch, quantity and working conditions so we can confirm the grade and finish.
Request a Quote