ISO 9001:2015 certified · Supplier & exporter of stainless steel pipe fittings, flanges & valves
SS Dairy Clamp with Stand

Representative image — supplied to your specification & grade.

Clamps & Pipe Supports

SS Dairy Clamp with Stand

Kotadia Inc. is a manufacturer, supplier & exporter of SS Dairy Clamp with Stand. Standard: Dairy clamp with stand Material: SS 304 Features: Single-pin clamp in SS 304 with a welded support rod. Application: Supporting clamped dairy lines above drains and floors, and holding sight glasses and sample points steady in the plant.

Made in Ahmedabad, Gujarat, India · supplied across India · exported worldwide

Made to order

or call +91 8497001001 · reply usually within 1–2 working hours

  • ISO 9001:2015 certified
  • MTC (Material Test Certificate) on request
  • RoHS & REACH compliant
  • Batch-traceable production
  • Custom sizes & grades on order
  • Export-ready packing & documents

SS Dairy Clamp with Stand is manufactured and supplied by Kotadia Inc. in Ahmedabad, Gujarat, India, in SS 304. Single-pin clamp in SS 304 with a welded support rod. Typical use: Supporting clamped dairy lines above drains and floors, and holding sight glasses and sample points steady in the plant. Available in 1" to 4". Every lot is dimensionally checked before packing and comes with an MTC on request; custom sizes, threads and coatings are made to drawing. Also supplied across India and exported worldwide — request a quote with your size, grade and quantity.

Areas we serve

SS Dairy Clamp with Stand is dispatched from Ahmedabad across India, including:

  • Ahmedabad
  • Surat
  • Vadodara
  • Faridabad
  • Delhi
  • Vapi
  • Dahej
  • Rajkot
  • Bengaluru
  • Bangalore
  • Chennai
  • Noida
  • Rohtak
  • Pune
  • Mumbai

We also export to:

  • UAE
  • USA
  • UK
Technical product sheetKotadia Inc.
TypeDairy clamp with stand
MaterialSS 304
Size1" to 4"
PinSingle pin
RodSS rod, length to order
FinishPolished
CertificationMTC on request
Manufactured to IS / DIN / ISO / ASTM & BS standards — non-standard sizes made to drawing.Ask for full datasheet →

Product description

Overview

A heavy single-pin TC clamp with a stainless rod and foot welded to the body, so a clamped joint stands clear of the floor or a support rail. It holds the union rigid and keeps the ferrule faces from taking the weight of the line.

Dairy clamp with stand.

Construction and features

  • Single-pin clamp in SS 304 with a welded support rod.
  • Holds a TC union off the floor during cleaning.
  • Sizes 1″ to 4″, rod length to order.
  • Also made in a rubber-lined version for glass and sight glasses.

Size range

Size TC OD Rod length Material
1" 50.8 mm 100–300 mm SS 304
1.5" 50.8 mm 100–300 mm SS 304
2" 63.5 mm 100–300 mm SS 304
2.5" 76.2 mm 100–300 mm SS 304
3" 91 mm 100–300 mm SS 304
4" 119 mm 100–300 mm SS 304

Applications

Supporting clamped dairy lines above drains and floors, and holding sight glasses and sample points steady in the plant.

Material, grade and certification

Supplied in SS 304.

Every lot is checked dimensionally before packing, and a Material Test Certificate (MTC) is issued on request. Sizes outside the table above, intermediate lengths and special coatings are made to drawing; send the sketch or sample and we will quote against it.

Manufacturer-Direct · Pan-India & Export

Need a quote for SS Dairy Clamp with Stand?

Share your sizes, grades and quantity — our team replies with the best manufacturer-direct price, usually within 1–2 working hours.

Frequently asked questions

What sizes of ss dairy clamp with stand do you supply?
We supply ss dairy clamp with stand in 1" to 4". Sizes outside the table on this page and special finishes are made to drawing, so send the requirement and quantity for a quotation.
Which material, grade or finish should I choose?
SS 304. Grade and finish are matched to the service - 316L and a finer polish for pharma and chloride exposure, 304 for general dairy and utility lines. Mill test certificates are issued on request.
Can you make a custom ss dairy clamp with stand?
Yes. Non-standard dimensions, ends and finishes are produced to drawing or sample. Send the sketch, quantity and working conditions so we can confirm the grade and finish.
Request a Quote